Adjustment
1. We prepare the car for work (see "Preparing the car for maintenance and repair").
2. Remove the wire blocks from the terminals of the brake signal switch.
3. Open end wrench by 19 mm Loosen the switch locknut.
The brake light switch is also a pedal stop in its upper position.
4. Turning the switch, we lower the pedal, reducing its free play; turning the switch, raise the pedal, increasing its free play.
5. After adjustment, we fix the switch in the required position with a lock nut.
6. By pressing the brake pedal several times, we check the operation of the brake signals.