Air filter parts
1 – a hose of an air inlet of warm air; 2 - cold air intake; 3 - thermostat; 4 - filter element; 5 - cover; 6 - filter mounting plate; 7 - remote bushing; 8 - gasket; 9 - branch pipe for removal of crankcase gases to the spool device of the carburetor; 10 - exhaust manifold of crankcase gases; 11 - air filter housing; 12 - warm air intake; 13 - thermostatic damper; 14 - thermostat housing
The power supply system includes fuel, air and exhaust gas supply devices.
Fuel tank 8 (see fig.Carburetor fuel supply devices) welded, stamped from leaded steel sheet, painted with black enamel. The tank is installed in the trunk on the right side on a rubber gasket and is attached to the body with two clamps 10, tightened with a bolt.
Fuel pump 1 is a diaphragm type, mounted on the left side of the cylinder block and driven by a pusher from the eccentric of the oil pump drive shaft and the ignition distributor. To fill the system with fuel, there is a manual fuel pumping lever.
The dry type air filter consists of a housing 11, a cover 5 and a filter element. A thermostat 3 is installed on the air filter pipe.