You will need: In summer - clean water, in winter - non-freezing liquid.
Recommendation: Use brand-name anti-freeze fluids or fluids recommended by the manufacturer (see annex 2).
Warnings:
- Observe precautions when handling anti-freeze liquid.
- Always make sure that the level in the washer reservoir is sufficient. Do not turn on the washer if the liquid level drops below the pump intake hole inside the reservoir - the washer pump motor may fail.
Unscrew the washer reservoir cap.
Remove the strainer bowl and check the strainer. If it is dirty, rinse the screen with water and replace the glass.
Add liquid to the level of the grid, then wrap the tank cap.
If you need to drain the fluid from the tank, disconnect the block with wires from the pump and...
... removing the tank from the bracket (lifting it up), unscrew the lid of the tank, remove the glass with a mesh and drain the liquid from the tank.