- keys for "10" and "13"
Tip: Monitor the condition of the battery terminals. Dirty and oxidized battery terminals increase the resistance between the terminals and the cable tips. This leads to difficult engine starting and rapid battery discharge.
Advice: Clean the oxidized terminals with fine sandpaper and lubricate with Litol-24 grease.
Attention! The battery must be securely fastened, otherwise it will quickly fail due to vibrations.
1. Remove the nuts and disconnect both wires from the battery terminals.
2. Loosen the mounting nut and remove the bracket.
3. Move the battery forward a little and remove it.
4. When installing the battery, make sure that the bracket rests against the protrusion on the platform.
5. First, connect the wire to the "+" terminal.
6. Do not mix up the wires. There are "+" and "-" marks on the wire tips and battery terminals.
The text is copied from the online portal [VAZBOOK.ru]