Radiator of the cooling system: 1 - drain plug; 2 - sensor for turning on the fan; 3 - pins of the lower fastening; 4 - rubber pads
1. Install the heatsink and fan shroud in the reverse order of removal, taking into account the following points.
2. Install the rubber pads into the holes in the body first, and then insert the radiator locating pins into them.
3. Before installing the radiator in the engine compartment, tilt it and connect the upper cooling system hoses to the radiator.
4. After installation, fill the coolant into the cooling system (see subsection 11.5.7.).