Removing
1. Disconnect the car terminal from the negative terminal of the battery.
2. We shift down the steering wheel.
3. Remove the lining of the instrument panel.
4. With pliers, carefully, so as not to damage the plastic hinges of the instrument panel, we bend the edges of the two plates of the upper fastening of the instrument panel.
5. On both sides of the shield, use a Phillips screwdriver to unscrew the two screws securing the instrument panel to the instrument panel brackets.
6. We take out the shield from the opening of the instrument panel and disconnect the two connectors of the wiring harnesses.
Note. The instrument panel connectors are color-coded, so there is no need to label the connectors.
7. Remove the instrument panel.
Installation
We install the instrument panel and all previously removed parts on the car in reverse order. We connect the wire harness connectors to the instrument panel in accordance with their color.