Replacing the battery of the remote control for locking and unlocking doors (VAZ-2110)

The remote control has a lithium battery type CR2032, with a voltage of 3 V. If the supply voltage is within the normal range, then each time you press any button on the remote control, the indicator built into the key lights up with a short flash. If, when you press any button on the remote control, the indicator lights up with two short flashes or does not light up, you should replace the battery. To do this, do the following:

• use a flat-head screwdriver to separate the two halves of the housing;
• remove the board from the case;
• replace the battery, observing the polarity;
• insert the board into the case;
• snap the case halves together.