ATTENTION! Regularly check the technical condition of the car:
1. Monitor the oil level in the engine and gearbox crankcases, the level of cooling, brake and washer fluids. A drop in the oil and operating fluid levels, accompanied by the appearance of traces of them on the outer surfaces of the vehicle's units and assemblies, indicates a leak. In this case, it is necessary to immediately identify and eliminate the causes of the leak on certified SSSN.
2. Check and adjust the air pressure in your tires to the correct level (see table 2). A pressure difference of only 0.02-0.03 MPa on one axle increases fuel consumption and worsens controllability, and during emergency braking can lead to skidding.
3. Check the serviceability of the working brake system (no brake pedal failure) and parking brake system (lever lock).
4. Monitor the malfunction of the SNPB (diagnostic indicator SNPB-19
, instrument clusters fig. 28). When the diagnostic indicator of the airbag system is switched on, in order to guarantee the activation of the driver's airbag, it is necessary to eliminate the cause of the malfunction in the airbag system on the SSNS.
Without delay, eliminate any detected faults on certified PSSS.
The original source is located on the website: VazBook.ru