Contents: Correction of the clock rate ↓ Setting the current time (calendar) ↓ Setting an alarm ↓ Turning off the alarm ↓ Adjusting the brightness of the…↓ Calibration of the fuel level sensor ↓ Installing a speed alarm ↓
Correction of the clock rate
Press button 4 in the "Current time" mode.
On the sixth time signal, press button 1, which will reset the seconds and round off the hours.
Setting the current time (calendar)
Press button 4 in the "Current time" ("calendar") mode.
Use buttons 5, 6 to set the desired hour (day) value.
Press button 4.
Use buttons 5, 6 to set the desired value for minutes (month).
Press button 4 to complete the time (calendar) setting.
Setting an alarm
Press button 4 in the "Alarm" mode.
Use buttons 5, 6 to set the desired hour value.
Press button 4.
Use buttons 5, 6 to set the desired minutes.
Press button 4 to complete the alarm setting. In the "Current Time" mode, the alarm symbol will light up (alarm clock is on).
Turning off the alarm
Press button 4 in the "Alarm" mode.
Press button 1 to turn off the alarm. The digital digits will show "--.--" and in the "Current time" mode the alarm symbol will not light up (alarm clock is off).
Adjusting the brightness of the indicator backlight
When the side lights are on, the illumination level is adjusted using the instrument scale lighting regulator.
When the side lights are off, the backlight level is adjusted programmatically:
- press button 4 in the "Travel time with stops" mode. All single segments will be displayed on the indicator (pictograms), which is a sign of the backlight level adjustment mode, and the digital digits will display a number corresponding to the backlight level as a percentage of the maximum value;
- use buttons 5, 6 to set the required level of backlight brightness;
- press button 4 to exit the brightness adjustment mode.
Calibration of the fuel level sensor
To make the correction, you need to drain all the gasoline from the tank.
Press and hold button 4 for more than 2 seconds in the "Fuel level" mode. The indicator will show a flashing "0".
Press and hold button 3 for 1 second until a confirmation sound appears. After this, the indicator will show a flashing number "3".
Pour 3 liters of gasoline into the gas tank using a measuring container, wait for the time required for the fuel level sensor to settle, press and hold button 3 for 1 s until a confirmation sound signal appears.
Continue this procedure until the maximum value of 39 l, after which the computer automatically exits the mode.
Installing a speed alarm
Press button 4 in the "Medium speed" mode.
Use buttons 5, 6 to set the required speed threshold.
Press button 4 to exit the speed limiter setting.