Contents: Removal ↓ Installation ↓
To complete the work you will need an assistant, an inspection pit or overpass.
Removal
1. Prepare the car for work (see "Preparing the car for maintenance and repair").
2. Remove the radiator grille (see "Radiator grille - removal and installation").
3. Unscrew the two screws securing the mudguards to the front fenders (see "Front fender liner - removal and installation").
4. With a socket wrench by 10 mm loosen the five nuts of the front engine mudguard mount.
5. On the right and left sides of the bumper with a socket wrench by 8 mm we unscrew one bolt at a time from the lower mounting of the bumper to the body bracket.
6. With a socket wrench by 10 mm loosen the two bolts of the upper bumper mount.
Note: The following operation should be performed together with an assistant.
7. Simultaneously, on both sides, move the bumper forward along the guides of the side brackets and remove the bumper together with the headlight covers.
Installation
We install the front bumper in the reverse order.