Removing
1. Remove the vacuum brake booster (see "Vacuum brake booster - removal and installation").
2. To maintain the previous adjustment of the brake pedal, mark the position of the locknut of the brake light switch with a marker.
3. Open end wrench by 19 mm loosen the locknut.
4. Remove the switch from the pedal assembly bracket.
5. Use a slotted screwdriver to remove the brake pedal axis locking bracket.
6. Disconnect the return spring from the pedal.
7. Prying with a slotted screwdriver, remove the pedal axle and remove the pedal from the bracket.
8. Remove two plastic bushings from the brake pedal.
Installation
1. Lubricate the new bushings and the brake pedal axle with grease.
2. Install the pedal in reverse order.