Clutch and brake pedals in collapsible form: 1 - the axis of the pedals; 2 - axle bushings; 3 - release spring of the clutch pedal; 4 - retraction spring of the brake pedal; 5 - locking bracket; 6 - brake pedal; 7 - remote bushing; 8 - clutch pedal
Attention! If there is a lot of play in the clutch or brake pedals, the pedal axle bushings are worn out and must be replaced.
Attention! If necessary, also replace broken or stretched pedal return springs.
1. Remove the retaining clip from the clutch pedal pin.
2. Disconnect the cable end from the clutch pedal.
3. Disconnect the clutch pedal return spring from the bracket.
4. Remove the retaining clip from the brake pedal pin.
5. Remove the brake pedal pin.
6. Disconnect the brake pedal return spring from the bracket.
7. Remove the retaining clip from the pedal shaft.
8. Pull the pedal shaft out of the bracket...
9.... and remove the brake pedal with spacer from the axle.
10. Completely remove the axle from the bracket together with the clutch pedal. Remove the pedal from the axle and remove the bushings.
11. Install the pedals in the reverse order, having previously lubricated the rubbing parts with Litol-24 or LSTs-15 grease.