- keys "for 8", "on 10"
- screwdriver
Disconnect the wire from the terminal "–" battery.
Open the tailgate and remove the storage shelf from the luggage compartment.
The rear door glass washer pump is of a non-separable type and must be replaced in the event of a malfunction.
1. Remove the two bolts securing the rear door glass washer reservoir bracket and...
2.... remove the tank with the bracket from the niche of the body.
3. Disconnect the fluid supply pipe to the washer pump from the reservoir.
4. Remove the two nuts securing the washer pump bracket and...
5.... remove the washer pump with bracket assembly from the body niche.
6. Disconnect the wire connectors from the washer pump (the black wire must be connected to the contact "–" pump).
7. Disconnect the outlet and inlet pipes from the pump and remove the pump from the vehicle.
8. If necessary, loosen the pump bracket pinch screw and...
9.... remove the bracket from the pump.
10. Install the rear door glass washer pump in the reverse order of removal.