To dismantle the front seat, move it all the way back, unscrew the limit screw and unscrew the nut of the bolt that secures the sled guide to the floor. Do the same by first moving the seat all the way forward. The seat can now be removed.
Since the rear seat consists of a cushion and a backrest, the cushion is first removed, which is fixed with two spikes located on the floor cross member (the pillow is put on spikes with two holes). To remove the pillow, just press the front edge of the pillow with your hand, and lift the pillow up with the other hand. By removing the cushion, you will provide free access to the two tongues of the rear seat back frame. Bend the tongues, release them from the brackets located on the rear wheel arches, and, lifting the backrest, remove the two slats of the back frame from the brackets of the tailgate shelf. Installation is carried out in the reverse order.