Lubrication scheme
Note on the lubrication schedule
Position in figure | Name | List of works |
Every 500 km | ||
1 | Crankcase | Check oil level and top up if necessary |
Every 10,000 km | ||
2 | Crankcase | Change oil |
3 | Body | Lubricate door hinges, hood latch drive rod |
Lubricate the rubbing areas of the door opening limiter, the hinge and spring of the fuel tank hatch, the hood stop, the torsion bars of the trunk lid | ||
Lubricate the seat movement slides | ||
Lubricate door keyholes and trunk lids | ||
Lubricate the axle, spring and cracker of the door lock retainer | ||
4 | rear axle housing | Check oil level and top up if necessary |
Check for oil leaks | ||
5 | gearbox housing | Check oil level and top up if necessary |
Check for oil leaks | ||
Every 20,000 km | ||
6 | Front wheel hubs | Change grease in bearings |
7 | Accumulator battery | Lubricate terminals and clamps |
8 | Distributor | Pour 2 - 3 drops of oil into the oiler hole |
Every 30,000 km | ||
9 | Front propeller shaft flange | Lubricate spline connection |
10 | Starter | Lubricate the screw splines of the shaft, bushings of the covers and the engagement gear |
Lubricate drive ring | ||
Every 60,000 km | ||
11 | rear axle housing | Change oil |
12 | gearbox housing | Change oil |
13 | Steering gear housing | Check oil level and top up if necessary |
Check for oil leaks |