Needle valve and float — replacement (VAZ-2104)

1. Remove the carburetor cover (see below, "Carburetor cover - removal and disassembly").

2. Using a punch, knock the float axis out of the bracket hole on the cover.



3. Remove the axle and the float together with the needle valve.



4. Key by 10 mm unscrew the needle valve seat.



5. Install a new needle valve with a seat and a float.



6. Check and, if necessary, adjust the fuel level in the float chamber (see "Fuel level in the float chamber - checking and adjustment").

(The article is copied from the website: VAZbook.ru)

7. Install the cover and the remaining removed parts in reverse order.