Replacing brake fluid (VAZ-2105)

To prevent air from getting into the hydraulic drive system when replacing the brake fluid and to spend a minimum amount of time on this operation, adhere to the following rules:

• proceed in the same order as when bleeding, but use a hose with a glass tube at the end, which is lowered into a container with brake fluid;
• press the brake pedal and pump out the old brake fluid until new fluid appears in the tube (lighter) fluid, then perform two full strokes of the brake pedal and, holding it in the pressed position, tighten the nipple. When bleeding, monitor the fluid level in the tank and promptly top up the fluid to the maximum level;
• repeat the same operation on each working cylinder in the same order as when bleeding;
• fill the reservoir to the maximum level and check the operation of the brakes while driving the vehicle.

[The article is copied from the website: vazbook.ru]