Contents: Removal ↓ Installation ↓
Removal
1. Prepare the car for repair work.
2. Disconnect the additional brake light wire connector.
3. Mark the color of the wires on the connector. Using a thin-bladed screwdriver or a large paper clip, press the locking tabs on the wire tips and remove the tips from the connector.
4. Using a 10 mm wrench, unscrew the four spoiler mounting nuts and, holding it with your hand, remove the two mounting plates.
5. Remove the spoiler from the trunk lid,...
...while removing the additional brake light wiring harness from the hole in the trunk lid.
Installation
We install the spoiler and all previously removed parts on the car in the reverse order.