Removing
1. Drain the coolant (see "Coolant - replacement").
2. Remove the electric fan (see above, "Electric fan - removal, disassembly and installation").
3. Having tilted the radiator back, loosen the clamps, remove the steam outlet hose and the coolant supply hose from the radiator pipes.
4. After loosening the clamp, remove the coolant outlet hose from the radiator pipe.
5. Carefully remove the radiator from the engine compartment.
6. In case of replacing the radiator, remove the two rubber supports and the drain plug with the gasket, if they are not on the new radiator.
Installation
1. If the radiator was in operation, then before installation, we wash its internal cavity with a stream of water and detergent, clean it and wash it from the outside.
2. Install the radiator in reverse order and fill the engine cooling system with liquid.
3. We start the engine and make sure there is no coolant leakage.