All articles on the device and repair of the transfer case units of VAZ-21213 Niva cars.
Transfer box device The transfer box device is shown in fig. 3-35. Pic. 3-35. Transfer case: 1 - driven gear; 2 - differential bearings; 3 - spring washer; 4 - retaining ring; 5 - differential lock...
Transfer box drive device The transfer box drive device is shown in fig. 3-36. Pic. 3-36. Transfer box drive: 1 - fork of the differential lock clutch; 2 - differential lock clutch; 3 - fork locking bolt;...
Removal, installation and centering of the transfer case Removing Place the vehicle over a pit or on a lift. Release the parking brake lever and place the transfer case and transmission shift levers in the neutral position. Turn away...
Transfer case disassembly Wash the transfer case from the outside and drain the oil. Mount the transfer case on a stand for dismantling and loosen the nuts securing the flanges on the drive shaft and on...
Transfer case assembly The assembly of the transfer case is carried out in the reverse order disassembly , considering the following: assemble the center differential by aligning the marks on its...
Checking the technical condition of the transfer case Before inspection, thoroughly clean all parts of the transfer box with a brush and scraper, and then rinse. Blow out the parts with compressed air. Rinse and blow out the bearings...
Transfer case test Test the assembled transfer case at the stand for noise, build quality and no oil leakage. Carry out the check sequentially in the highest and lowest gears at the following...