Unscrew the two screws securing the rearview mirror and remove the mirror. Unscrew the screws and remove the sun visors and handrails.
With a one-piece molded roof upholstery, three fastening buttons are removed and the upholstery is taken out through the opening of the tailgate.
To remove the upholstery from a PVC film, remove the upper part of the front door seals, the tailgate (windshield must be removed) and brackets for fastening the upholstery around the perimeter. Remove the roof upholstery and take out the arches with anti-creak bushings.
Install upholstery in reverse order. When installing upholstery from a film, arcs are installed in a new upholstery and anti-creak bushings are put on. First, the last fifth arc is installed in the openings of the body, then the fourth, etc. They grab the first arc along the edges with two hooks, stretch the upholstery and fasten it with hooks behind the wind window opening. Lubricate the edges of the upholstery with glue 88PN-35 and fasten them with brackets to the flanges of the openings of the wind window and doors. Excess upholstery around the perimeter is cut off. Replace the removed components and parts.