Roof upholstery made of perforated PVC film (PVC) with a gasket for thermal and sound insulation made of canvas from a non-woven synthetic material with a thickness of 6 mm. The canvas is glued to the roof panel with 88NP-35 glue. The edges of the roof upholstery are held in the openings of windows and doors with brackets and covered with seals of the body openings. Five transverse arcs are inserted into the transverse folds of the upholstery, the ends of which enter into plastic anti-creak bushings inserted into the holes of the body.
The vehicles are also equipped with one-piece molded roof linings made of polyurethane foam coated with PVC film.
The upholstery of the sidewalls is made of three layers: fibreboard (fiberboard), non-woven synthetic fabric and PVC film, the edges of which are welded to fiberboard with high-frequency currents (HDTV). The upholstery on each side is attached with plastic holders to the holes in the inner side panel.
Upholstery of the side panels of the front (under the dashboard) Made from waterproof cardboard. On the rear edge, the upholstery is fastened into the holes with rubber holders, the front part is fastened with a wire holder.
The upholstery of the front doors is made in the same way as the upholstery of the sidewalls and is fastened with plastic holders. In the middle part, the upholstery is additionally fastened with screws of the armrest handle.
The luggage compartment shelf is made of light gray polypropylene and is installed with axles in the openings of the body.
The interior floor is covered with carpets with a decorative pattern, which are fastened with buttons into the openings of the body, as well as floor sill linings. The front mats are made separately from rubber. The rear floor and luggage compartment floor mat is made of PVC with an embossed front surface.
The front, center and rear pillars of the body do not have upholstery, they are painted black.