- they act in the same order as when bleeding the brakes, but use a hose with a glass tube at the end, which is lowered into a vessel with brake fluid;
- pressing the brake pedal, pump out the old brake fluid until new fluid appears in the tube, after which they perform two full strokes with the brake pedal and, holding it in the depressed position, wrap the fitting. When pumping, monitor the level of brake fluid in the reservoir and top up the fluid in a timely manner to the maximum level;
- repeat the same operation on each working cylinder in the same order as when pumping;
- fill the tank to the maximum level and check the operation of the brakes while the car is moving.