Parking brake — inspection and repair (VAZ-21011)

1. Carefully check the condition of the parking brake components.

2. If a break or fraying of the wires is detected, replace the cable with a new one.

3. Make sure that the sector teeth and handle latches are not damaged, replace worn parts.

4. Check the serviceability of the spring. It should ensure that the lever returns to its idle position.

5. Check the condition of the rear cable housing and the fastening of the ends on the housing, and also make sure that the cable moves freely inside the housing. If the housing is damaged and the fastening of the ends is loose, replace the cable.

(The original is available on the website: VAZBOOK)