Generator assembly (VAZ-21011)

1. The generator is assembled in the reverse order of disassembly.

2. The misalignment of the holes in the generator cover paws should be no more than 0.4 mm. Therefore, during assembly, it is necessary to insert a special gauge into these holes, which has a diameter of 12 mm on one side and 22 mm on the other.

3. The conical spring washer of the pulley must be in contact with the nut with the convex side. Tighten the pulley nut to a torque of 38.4–88 N·m (3.9–9.0 kgf·m).

[The text is taken from the online resource: vazbook.ru]