- tighten the nuts securing the camshaft bearing housings with a torque of 2.2 kgf·m in the order indicated on rice. 25;
- adjust the gaps in the gas distribution mechanism;
- check the engine for the absence of extraneous noise and knocks;
- check the tightness of the seals;
- check the condition of the camshaft drive belt and, if necessary, adjust its tension.
Every 15,000 km of run it is necessary:
- check the engine for the absence of extraneous noise and knocks;
- check the tightness of the seals;
- check the condition of the camshaft drive belt and, if necessary, adjust its tension.
Every 30,000 km, adjust the clearances in the gas distribution mechanism.
Replace the timing belt for the camshaft drive every 60,000 km.