| Clearances in the drive on a cold engine (18–20°C), mm: for intake valves for exhaust valves | 0,2±0,05 |
| Minimum crankshaft speed, min—1 | 750–800 |
| Oil pressure in the engine lubrication system at a crankshaft speed of 5600 min⁻¹ and an oil temperature of 85°C, kgf/cm² | 4,5–6,5 |
| Minimum pressure in the engine lubrication system at 750-800 min—1, kgf/cm² | 0,8 |
| Temperature of the liquid in the cooling system of a warmed-up engine at an air temperature of 20-30°C, when driving with a full load at a speed of 80 km/h,°C, no more than | 95 |
| Coolant level in the expansion tank on a cold engine | 25–30 mm above the mark "MIN" |
| Coolant density (Tosol A-40) at 20°C, g/cm³ | 1,078–1,085 |
| Spark plug electrode gap, mm | 0,7–0,8 (1,0-1,13) (For engine mod. 2111) |
| Initial ignition advance angle before TDC, deg.: engine 2108 engine 21083 | 1±1 4±1 |
| Clutch pedal travel, mm: when adjusting in operation | 125–135 125–160 |
| Free travel of the brake pedal with the engine off, mm | 3–5 |
| Minimum permissible thickness of linings for front and rear brake pads, mm | 1,5 |
| Fluid level in the brake hydraulic reservoir with the cap removed | to the mark "MAX" |
| Maximum slope on dry hard ground on which a fully loaded vehicle is held indefinitely by the parking brake when the lever is moved by 4–5 teeth of the sector, % | 30 |
| Free play of the steering wheel in the position corresponding to movement in a straight line, deg, no more than | 5 |
| Front wheel alignment under load 320 kgf, mm | 0±1 |
| Front wheel camber under 320 kgf load, deg | 0±30' |
| The same when measuring between the rim and the vertical, mm | 0±3 |
| Longitudinal angle of inclination of the wheel rotation axis under load 320 kgf | 1°30'±30' |
| Tire pressure, MPa (kgf/cm²): 155/80 R13, 175/70 R13 165/70 R13 | 0,19 (1,9) 0,20 (2,0) |
(The article is copied from the website: VAZbook.ru)