Contents: Removal ↓ Installation ↓
Removal
1. Preparing the vehicle for work (see point 2a "Preparing a car for maintenance and repair").
2. Using a Phillips screwdriver, unscrew the four screws and three self-tapping screws securing the steering column pads.
3. Move the steering column tilt adjustment lever to the lower position.
4. Lower the lower trim and remove the wire harnesses from the trim holder.
5. Remove the lower steering column cover.
(The information can be read on the website VAZBOOK)
6. Lower the steering column to the lower position, remove the upper cover and the rubber sealing ring of the ignition switch.
Installation
We install the decorative steering column trims and the rubber sealing ring of the ignition switch on the car, and all the removed parts in the reverse order of removal.