The cars are equipped with two remote controls and a red training code key. The remote controls are also working code keys of the APS-4 anti-theft system. In order for the remote controls to work as part of the car, they must be activated (trained) using the training code key. It is possible to train and operate the system simultaneously with four remote controls.
ATTENTION! Selling a car equipped with an anti-theft system without activating it and training the remote controls is prohibited. The procedure for training the remote controls and activating the anti-theft system must be performed at pre-sale vehicle preparation points or at service stations in the presence of the car owner. If the car owner refuses to perform this procedure, an entry must be made in the service book with the signature of the sales dealer, the company seal and the owner's signature. If the car owner loses the training code key, claims regarding the quality of the remote control system will not be accepted.
System operation
1. Locking and unlocking door locks using the remote control.
To lock the side doors of the car, press the button on the remote control with the closed lock symbol. This will lock the doors.
To unlock the side doors of the car, press the button on the remote control with the open lock symbol. This will unlock the door locks.
To open the trunk lid (tailgate) press and hold the button with the open trunk symbol on the remote for a few seconds. This will open the trunk lid or unlock the tailgate.
2. Locking and unlocking door locks from inside the vehicle.
To lock all side doors from inside the car, press the lock button in the driver's door. This will lock all side doors.
To unlock all side doors from inside the vehicle, lift the lock button in the driver's door. This will unlock all side doors.
To open the trunk lid (tailgate) from inside the car, press the button on the dashboard.
3. Locking and unlocking door locks using a key.
To lock all side doors from outside the vehicle, turn the key in the driver's door lock clockwise. This will lock all side doors.
To unlock all side doors from outside the vehicle, turn the key in the driver's door lock counterclockwise. This will unlock all side doors.
Note: If the lock and unlock commands are received frequently, the system will stop responding to them, protecting the actuators from overheating. If this happens, do not issue lock and unlock commands. After a while, the system will start responding to commands again.
4. Resynchronization of codes.
If the remote control buttons are pressed outside the radio channel coverage area, the "floating" code counter in the remote control goes out of synchronization with the counter in the system control unit. If the number of remote control button presses outside the signal reception area exceeds 1000, the system will stop responding to remote control commands. In this case, the retraining procedure for all remote controls should be repeated at the service station.