Contents: Removal ↓ Installation ↓
Recommendation: Pump replacement operation requires experience and precision (fuel module components may be damaged), therefore, in case of fuel pump failure, it is recommended to replace the fuel module assembly.
To perform the operation you will need a hair dryer (technical) or hot water.
Removal
1. Remove the fuel module (see "Fuel module of engines 21114 and 21124 (1.6i) - removal and installation").
2. Remove the pump from the fuel module housing (see above, "Fuel module of engines 21114 and 21124 (1.6i) - cleaning the mesh filter").
Comment.The strainer is held by a locking spring washer on the cylindrical projection of the fuel pump
3. Remove the mesh filter from the electric fuel pump pipe.
4. At the same time, we help with a slotted screwdriver with a thin blade, carefully moving the lock washer along the pump lug.
5. After pressing the lock, remove the fuel pump from the housing.
6. Using a hair dryer, heat up the end of the corrugated tube placed on the electric fuel pump nozzle.
Warning! Monitor the temperature of the heated parts, do not overheat the pump and tube.
7. Remove the corrugated tube from the pump branch pipe.
Installation
We install the fuel module in the reverse order. At the same time, putting on the mesh filter, we press the spring washer of the filter onto the pump protrusion with a slotted screwdriver with a wide blade.
The material is posted on the online resource VAZBOOK.ru
