| Clearances in the valve drive mechanism between cams and levers on a cold engine, mm | 0,15 |
| Oil pressure in the engine lubrication system at a crankshaft speed of 5400 min⁻¹ and an oil temperature of 85°C, MPa (kgf/cm²) | 0,35 – 0,45 (3,5 – 4,5) |
| Temperature of the liquid in the cooling system of a warmed-up engine at an air temperature of 20–30°C, full load and movement at a speed of 90 km/h, no more than, °C | 95 |
| Coolant level in the expansion tank on a cold engine | 3-4 cm above the "MIN" mark |
| Density of coolant at 20°C, g/cm³ | 1,078 – 1,085 |
| Gap between contacts of ignition distributor, mm | 0,4±0,05 |
| Gap between spark plug electrodes, mm: | |
| - carburetor engine | 0,5 – 0,6 (0,7 – 0,8)* |
| - fuel injection engine | 1,00 – 1,13 |
| Initial ignition advance angle to TDC for VAZ-2105, 2103 engines when using gasoline, deg: | |
| – AI-91 | 0±1 (2±1)** |
| – AI-93 | 4±1 (6±1)** |
| Axial clearance in front wheel hub bearings, mm | 0,02 – 0,08 |
| Maximum permissible axial clearance in front wheel hub bearings during operation, mm | 0,15 |
| Generator drive belt deflection under a force of 100 N (10 kgf), mm | 10 – 15 |
| Free travel of clutch pedal, mm | 25 – 35 |
| Free travel of the brake pedal with the engine off, mm | 3 – 5 |
| Free play of the steering wheel in the position corresponding to movement in a straight line, no more than, degrees | 5 |
| The same, when measuring along the wheel rim, mm | 18 – 20 |
| Front wheel alignment of a run-in vehicle under load when measured between rims, mm | 2 – 4 |
| Front wheel camber for a run-in vehicle under load when measured between the rim and the vertical, mm (deg) | 1 – 5 (0°30' ±20') |
| Longitudinal tilt of the wheel pivot axis for a run-in vehicle under load, deg | 40±30' |
| Brake fluid level in brake and clutch hydraulic reservoirs | To the lower edges of the filler necks |
| Air pressure in tires 165/80R13 of the VAZ-2105 car and its modifications, MPa (kgf/cm²): | |
| - front wheels | 0,16 (1,6) |
| - rear wheels | 0,19 (1,9) |
| Air pressure in tires 175/70R13 of the VAZ-2105 car and its modifications, MPa (kgf/cm²): | |
| - front wheels | 0,17 (1,7) |
| - rear wheels | 0,2 (2,0) |
| Air pressure in tires 165/80R13 of the VAZ-2104 car and its modifications, MPa (kgf/cm²): | |
| - front wheels | 0,16 (1,6) |
| - rear wheels | 0,21 (2,1) |
| Air pressure in tires 175/70R13 of the VAZ-2104 car and its modifications, MPa (kgf/cm²): | |
| - front wheels | 0,16 (1,6) |
| - rear wheels | 0,22 (2,2) |
| Maximum slope on dry hard ground on which a fully loaded vehicle is held indefinitely by the parking brake when the lever is moved by 4–7 (2–8)*** sector teeth, % | 25 |
| Parking brake lever travel during adjustment, teeth | 4 – 5 (2 – 4)*** |
* For contactless ignition system.
** For VAZ-2101 engines.
*** For a vehicle with a double sector tooth.