Note. The work is shown with partial disassembly of the door. If necessary, the door can be removed after dismantling all its elements.
Helpful advice. When replacing a door, install the new door on the vehicle before painting and assembling it to make sure it does not require straightening.
You will need an assistant to carry out repairs.
Removing
1. Remove the door trim.
2. Remove the plastic film from the front door.
3. Remove the wire terminal from the negative battery terminal.
4. Disconnect the power window wire connector.
5. Disconnect the wire connector of the central locking switch.
6. Disconnect the door opening limiter from the rack.
Warning. To avoid deformation of the door, do not open it wide after the stopper has been released.
7. Disconnect the corrugated cover of the wiring harness from the door.
8. Through the hole in the end of the door, we remove the wires along with the connectors.
Warning. When performing the following work, the assistant should support the door.
9. Using a 13 mm socket wrench, unscrew the two door mounting bolts (one on each loop) and remove the door from the car.
Installation
We install the front door and all previously removed parts on the car in reverse order.