Contents: Removal ↓ Installation ↓
Removal
1. Remove the brake booster (see "Vacuum brake booster - removal, installation, replacement").
2. To maintain the previous brake pedal adjustment, use a marker to mark the position of the brake limit switch lock nut.
3. Using a 19 mm open-end wrench, loosen the brake pedal limit switch lock nut.
4. Remove the brake pedal limit switch from the pedal assembly bracket.
5. Using a slotted screwdriver, remove the brake pedal axle retaining clip.
6. Remember the location of the brake pedal return spring.
7. Using a slotted screwdriver, remove the pedal axle and remove the brake pedal from the bracket.
(The original can be found on the website: «VAZBOOK»)
8. Remove two plastic bushings from the brake pedal.
Installation
1. Lubricate the new bushings and the brake pedal axle with plastic grease (Litol-24).
2. Install the brake pedal and all removed parts on the car in the reverse order of removal.