Removal
1. Prepare the car for work (see "Preparing the car for maintenance and repair").
2. Unscrew the nut of the bolt securing the stabilizer bar to the lower arm of the front suspension (see "Anti-roll bar - replacement of struts") and knock the bolt out of the holes in the rack and lever.
We also remove the bolt connecting the stabilizer bar to the right suspension arm.
3. With a socket wrench by 13 mm using an extension, unscrew the two nuts securing the bracket of the left stabilizer bar cushion to the body.
We also unscrew the nuts securing the bracket of the other stabilizer bar cushion to the body.
4. Remove the stabilizer bar assembly with the struts and cushions.
Disassembly
1. Remove the racks from the bar.
2. By any available means (marker, sticky tape) we mark the place where the cushions will be installed on the bar.
3. Remove the cushion from the bar, having first removed the steel bracket from it.
(The original is posted on Internet resource: www.vazbook.ru)
Installation
We install the stabilizer in the reverse order.
Recommendation: To make it easier to install the pads and racks, apply a soap solution to the bar.