- keys "at 12", "at 15" And "at 17"
- screwdriver
Before starting work: Remove the corresponding wheel.
1. Remove the brake hose seal from the bracket on the strut.
2. Loosen the hose end on the caliper fitting.
3. Use a screwdriver to bend the antennae of the lock washers of the two caliper mounting bolts.
4. Unscrew the two caliper mounting bolts, holding the guide pins by the hexagons with the second key.
5. Remove the bolts with locking plates and...
6.... caliper - with guide pads.
7. Holding the hose tip by the hexagon wrench, unscrew the caliper from the tip. Be careful, brake fluid will flow from the hose.
8. Please note: there is a copper sealing ring on the hose end. Replace heavily compressed ring.
9. Install the caliper in the reverse order of removal. Secure the bolts from turning out by bending the antennae of the locking plates. Bleed the hydraulic brakes.