Places to check for possible oil leaks: 1 – oil level indicator (dipstick) in the engine crankcase; 2 – crankcase ventilation hose; 3 – cylinder head; 4 – head cover; 5 – small branch crankcase ventilation hose; 6 – large branch crankcase ventilation hose; 7 – gearbox oil level indicator (dipstick)
Check the seals regularly, especially on a new car, to detect hidden defects.
If you find traces of fluid leakage, first wipe the area thoroughly and inspect it after some time. The appearance of new traces of leakage indicates the presence of a leak. To eliminate it, contact specialists.
Oil leakage from several places in the engine at the same time can be caused by pinched crankcase ventilation hoses.
1. Cylinder head gaskets and head covers (around the entire perimeter).
2. Oil level indicator seal in the engine crankcase.
3. Connecting the crankcase ventilation hose to the fitting on the engine.
4. Gearbox oil level indicator seal.
Checking the car from underneath
Places to check for possible oil leaks: 1 – half shaft; 2 – oil pan; 3 – engine crankcase drain plug; 4 – gearbox; 5 – gearbox drain plug; 6 – gear selection rod; 7 – oil filter; 8 – Low oil pressure indicator lamp sensor
5. Oil pan gasket (around the perimeter) and the drain plug.
5. Oil pan gasket (around the perimeter) and the drain plug.
5. Oil pan gasket (around the perimeter) and the drain plug.
7. Rear crankshaft oil seal.
8. Oil filter and low oil pressure warning light sensor on the oil filter flange.
9. Speedometer drive seal.
10. Places of connection of gearbox housings and covers (around the perimeter).
11. Gearbox drain plug.
12. Oil seals for axle shafts and gear selector rod.