The body is painted with three or four layers of synthetic enamel. For better adhesion to metal and better adhesion of enamel, the body is primed with primer FL-093 or VKCh-0207 by cataphoresis.
The front of the body is closed by the front bumper, cladding and grille. The latter are painted to match the body color. A factory sign is attached to the radiator grille, which is made of plastic «under chrome» on a matte background.
Black plastic edging is installed on the body gutters and fastened due to elasticity. The central pillars of VAZ-2108 cars are closed from the outside with matte black plastic facings. Ornaments are attached to the right facing of the B-pillar and to the rear panel. Inscriptions on plastic ornaments are made «under chrome». The background of the ornaments is embossed.
The interior trim of the body in shape and color is selected in a single style that meets modern aesthetic requirements. All finishing materials of facings and upholstery have a matte surface that does not give glare.
The color of upholstery of doors, seats, sidewalls is selected depending on the color of the body.
The upholstery of the ceiling of the cabin to reduce weight and for better thermoregulation is made of polyurethane foam type «Bynat», integrally molded with fiberglass on both sides. From the side of the cabin, the upholstery is covered with a PVC film (PVC) with polyurethane foam backing. A plastic trim is attached to the upholstery along the trailing edge. The upholstery of the ceiling of the cabin is fastened in front of the sun visors using self-tapping screws, on the sides - with handrails, in the center - with a ceiling lamp and at the back - with four buttons.
The upholstery of the body pillars is made of black plastic. The upholstery of the windshield pillars is fastened with three self-tapping screws, the upholstery of the central pillars of VAZ-2108 cars is fastened with a hook and a button. The C-pillar upholstery is secured with two screws and a seat belt anchor.
The upholstery of the sidewalls to facilitate dismantling and installation is made of two parts, it is fastened, like the upholstery of the front doors, into the holes of the inner sidewall panel with plastic holders made on the inside of the upholstery.
The floors of the passenger compartment and the luggage compartment are covered with black carpets, molded from lightweight non-woven fabric with a polyethylene backing. In the door openings, the carpet is pressed against the thresholds, made of black polypropylene. Each cladding is fastened with six self-tapping screws.
The tailgate separates the luggage compartment from the passenger compartment. The shelf is made folding and consists of two halves, it can be removed and fixed in the rear of the luggage compartment.