Contents: Removal ↓ Installation ↓
Recommendation: Repair work on replacing the fuel pump requires experience and accuracy (fuel module components may be damaged), therefore, in case of fuel pump failure, it is recommended to replace the fuel module with the fuel pump assembly.
To perform repair work on replacing the fuel pump on a car, you will need: a hair dryer (technical) or hot water.
Removal
1. Remove the fuel module (see "Fuel module of the gasoline pump of the engine 21124 (1.6i) - removal, installation, replacement").
2. Remove the fuel pump from the fuel module housing (see p. 3-7 "Fuel module of the gasoline pump of the engine 21124 (1.6i) - cleaning the mesh filter").
Caution: The strainer is held in place by a retaining spring washer on the cylindrical boss of the fuel pump.
3. Remove the mesh filter from the fuel pump pipe.
4. At the same time, we help with a slotted screwdriver with a thin blade, carefully moving the lock washer along the lug.
5. After pressing the lock, remove the fuel pump from the housing.
6. Using a hair dryer, heat up the end of the corrugated tube placed on the fuel pump nozzle.
Warning: Monitor the temperature of the heated parts, do not overheat the fuel pump and pipe.
7. Remove the corrugated tube from the branch pipe.
Installation
We install the fuel module and all removed parts on the vehicle in the reverse order.
At the same time, putting on the mesh filter, using a slotted screwdriver with a wide blade, press the spring washer of the filter onto the protrusion of the fuel pump.
