Removing
1. Remove the engine oil pan (see above, "Engine oil pan - removal and installation, gasket replacement").
2. Key by 10 mm unscrew two screws (1) fixing the oil intake to the main bearing cap and bolt (2) attaching the oil receiver to the oil pump housing.
3. Remove the oil intake, removing its tube from the oil pump channel.
Comment. The connection between the oil intake and the pump is sealed with a rubber ring.
Installation
We replace the damaged or lost elasticity sealing ring.
Install the oil pan in reverse order.
Warning! The oil pickup bolt to the oil pump is longer than the oil pickup bolt to the main bearing cap.