Remove the rear seat (see Removal the rear seat).
We disconnect the fastening of the right rear seat belt to the side of the body.
We remove the hatch in the right trim.
We bend back the trunk mat.
Using a 7 mm head, unscrew the two screws at the bottom of the right trim.
We take out the ashtray.
Using a Phillips screwdriver, unscrew the two screws securing the ashtray housing to the right side of the car body.
We remove the ashtray body.
Using a Phillips screwdriver, unscrew the two screws that secure the upholstery to the floor crossbar,…
…two screws securing the upholstery to the floor of the luggage compartment…
…and two screws to secure the trim to the bottom of the rear pillar.
We unscrew the right extreme screw securing the rear door sill trim (see Removal the rear door lock drive). We bring the rear lower corner of the trim out from under the threshold trim, and the upper side of the trim out from under the flanging..
…and remove the right interior trim.
When removing the left trim, in addition to the above operations..
…we pry it off with a slotted screwdriver…
…and remove the cover of the rear window washer reservoir.
Using a screwdriver, remove the rear door lock handle cover.
(The article is taken from the website: vazbook.ru)
When removing the interior trim, move it forward, releasing the rear door drive handle.
We install the interior trim in the reverse order.