Combination wrench (open-end - box-end): 6; 7; 8; 10; 11; 12; 13; 14; 15; 17; 19; 21; 22; 24;27; 30.
Wrench for crankshaft pulley fastening nut.
Key for unscrewing brake pipe fittings and bleeder fittings.
Socket head: 7; 8; 10; 12; 13; 14; 17; 19; 21 (high); 22; 24; 27; 30.
Wrenches for heads.
Cardan joint.
Hexagon: 5; 12.
Phillips screwdrivers.
Slotted screwdrivers.
Impact screwdriver.
Soft metal punches.
Chisel.
Hammer.
Vice (with soft metal jaw pads).
Pliers.
Side cutters.
Sliding pliers.
Round nose pliers.
Snap ring pliers.
Pipe wrench (gas).
Needle file.
File.
Beard.
Mounting spatula.
Tin rod.
Valve compressor.
Tweezers.
Pliers for removing valve stem seals.
Bipod remover.
Three-legged puller.
Two-legged puller.
Silent block puller.
Ball joint puller.
Wedge puller.
Impact puller.
Crosspiece puller.
Oil filter remover.
Mandrel for installing a piston with rings into a cylinder.
Mandrel for centering the driven clutch disc.
Compression meter.
Pressure gauge.
Set of feeler gauges.
The probes are wide, 0.15 and 0.20 mm thick.
A device for adjusting thermal clearances in the valve drive.
Torque wrench (up to 25 kgf·m).
Torque wrench (up to 0.5 kgf·m).
Calipers.
Template ruler.
Micrometer.
Bore gauge.
Hourly indicator.
Hacksaw.
Syringe for filling transmission oil.
Grease gun for cardan shaft.
Electric drill.
Digital tester (multimeter).
Analog tester.
Volumetric flask.