Removing
1. We prepare the car for repair work (see paragraphs 1 and 2b, "Preparing the car for maintenance and repair").
2. Using a socket wrench with a 13 mm head and a spanner wrench of the same size, unscrew the two nuts securing the buffer bracket.
3. Remove the buffer bracket.
4. Using a 13 mm socket wrench, unscrew the two bolts securing the jet thrust platform to the clip, holding the bolt nuts with a spanner wrench of the same size.
5. Using a 13 mm socket wrench, unscrew the two bolts securing the jet thrust bracket to the gearbox.
6. Remove the jet thrust assembly from the vehicle.
Note. If necessary, you can remove any part of the jet thrust separately (see below points 2 and 3 "Jet thrust - disassembly and assembly").
Installation
We install jet thrust and all removed parts on the car in the reverse order of removal.