On the side of the air intake box of the body, slightly squeeze the plastic sleeve 3 (pic. 8-27) and, picking it up from above with a screwdriver and overcoming resistance, remove the jet assembly with the sleeve.
Pic. 8-27. Windshield washer jet: 1 - atomizer; 2 - screw; 3 - bushing; 4 - jet body with fitting
Remove screw 2, thoroughly clean all parts and blow compressed air through housing cavity 4 and nozzle 1.
Insert the sleeve 3 into the opening of the body. Insert the jet sharply into the sleeve so that the housing 4 slots into the flanges of the sleeve.
Check jet action.
Adjust the direction of the liquid jet by turning the body in the sleeve and turning the atomizer 1 while loosening the screw 2.