Contents: Removal ↓ Installation ↓
Removal
Raise the front of the car, place it on stands and remove the wheel.
Remove the hose guide brackets. Unscrew the bypass bolts, disconnect the hoses 10 (fig. 6-13), while preventing dirt from getting into the cylinder cavities. Plug the inlet holes of the cylinder block and hoses.
Having bent the edges of the front brake protective cover, unscrew the bolts securing the brake to the steering knuckle (Fig. 6-14); remove the brake assembly.
Fig. 6-14. Removing the front brake. The arrows indicate the bolts that need to be removed to remove the brake
Installation
The front brake is installed in the reverse order of removal.
After installation, restore the brake fluid level in the reservoir and bleed the system to remove air from the hydraulic drive.