If tarnishing, scratches, small scratches, marks from brush washing are found on the paintwork, we use a finely abrasive composition.
We squeeze out a finely abrasive composition onto a wet applicator..
... and apply it in a thin layer (in a circular motion) to the surface of the body.
We are waiting for the composition to become matte,..
…and polish it with a soft dry applicator (or soft dry cloth).
Since all the polishes used are water-based, applicators or rags can be easily restored in the wash.
If deep scratches are found that could not be removed with a fine abrasive compound, use a medium abrasive paste.
Squeeze out the paste onto a wet applicator..
... and with medium pressure, apply it along the scratch.
Let the paste dry and polish it with a soft, dry cloth. If necessary, this operation is repeated.
Scratches and chips that have reached the ground require touch-up. To mask these scratches, you can use a tinting pencil or colored polish.
Tinting wax pencil «Chipkit» contains special adhesive and corrosion inhibitors. Gently pressing, we fill in chips and scratches with a pencil - the pencil should move across their direction.
With a polishing cloth, remove excess wax from the damaged area, leveling the surface.
Squeeze colored polish onto a wet applicator..
... and apply it in an even thin layer on part of the part (to make it easier to polish later).
Let the polish dry and polish it with a soft, dry cloth. The polish must not be applied in direct sunlight or on a hot surface. If polish gets on plastic parts, immediately remove it with a damp cloth.
A colorless protective polish can be used on a new car with no paint damage.
Squeeze out a colorless protective polish onto a wet applicator..
... and apply it in an even thin layer on part of the part.
Let the polish dry and polish it with a soft, dry cloth.
Before winter, a gloss preservative should be applied over the polish to fix the protective layer.
We squeeze out the preservative onto a wet applicator and apply it in an even thin layer on a part of the part.
The gloss preservative can be applied to a new car without pre-polishing. But if the car has been in operation for more than a year, the body will need to be polished before applying the gloss preservative.