Using a Phillips screwdriver, loosen the three screws that secure the rim of the optical element to the headlight housing.
Turning the bezel counterclockwise..
…remove it.
We take out the optical element of the headlight..
... and disconnect the block from the lamp.
Opening the two ears of the wire holder,..
... take out the lamp.
We take a lamp suitable for use or a new one only by the base, without touching the glass bulb.
To remove the headlight housing..
... in the engine compartment, disconnect the headlight wire block.
We pry off the rubber plug of the mudguard with a screwdriver,..
... take it out and push the block into the hole formed.
Disconnect the hydraulic corrector from the headlight (see Removing the headlight corrector).
Using a Phillips screwdriver, unscrew the four screws securing the headlight housing to the body.
Remove headlight housing.
After installing the headlight on the car in reverse order, adjust it (see headlight adjustment).