- for intake valves - 0.2±0.05
- for exhaust valves - 0.35±0.05
The gap between the spark plug electrodes, mm — 1.00-1.13
Maximum permissible oil consumption during the warranty period, from fuel consumption, no more than, % — 0.4
Generator drive belt deflection under a force of 100 N (10 kgf), mm — 6-8
Timing belt deflection of a 16-valve engine when measured in the middle of the branch between the camshaft pulleys under a force of 100 N (10 kgf), mm — 5.2-5.6
Parking brake lever travel, teeth:
- when adjusted - 2-4
- in operation - 2-8
Density of battery electrolyte at 25°C for moderate climate, g/cm³ — 1.27±0.01
Free play of the steering wheel in the position corresponding to movement in a straight line, no more than, degrees — 5
Free travel of the brake pedal with the engine not running, mm — 3-5
Clutch pedal travel, mm:
- when adjusted - 120-130
- in operation - 120-155
Minimum permissible thickness of linings for front and rear brake pads, mm — 1.5
Temperature of the liquid in the cooling system of a warmed-up engine at an air temperature of 20-30°C, full load and movement at a speed of 80 km/h, no more than,°C — 95
The coolant level in the expansion tank on a cold engine is up to the upper edge of the fastening belt
The fluid level in the brake hydraulic reservoir with the cover removed and new brake shoe linings is up to the "MAX" mark
Front wheel alignment under load of 3200 N (320 kgf), mm — 0±1
Front wheel camber under load of 3200 N (320 kgf), deg — 0°±30'
Longitudinal tilt* of the wheel pivot axis under a load of 3200 N (320 kgf), deg — 1°00'-2°30'
Front wheel alignment of the equipped vehicle, mm — 1.5±1
Front wheel camber of the equipped vehicle, deg — 0°30'±30'
Longitudinal tilt* of the wheel rotation axis of the equipped vehicle, deg — 0°-1°30'
* The difference in longitudinal inclination of the steering axis of the right and left wheels must not exceed 1°.