- remove decorative trim 4 (rice. 7-31) the front end of the body, unscrewing the screws 5 fastening;
- loosen the screws 3 fastening the rim of the optical element of the headlight, turn the rim counterclockwise and remove it;
- remove the optical element of the headlight and replace the lamp;
- after replacing the lamp, install the optical element so that the brackets of the optical element fit into the sockets of the inner rim of the headlight.
Front lights. Loosen the two screws and remove the diffuser, then press lightly on the lamp, turn it counterclockwise and pull it out.
Side direction indicators. Replace a burnt-out bulb by removing the cartridge assembly with the bulb from the lantern from the side of the engine compartment.
Plafond. To replace the interior lamp bulb, gently pull it towards you. The plafond is held in the hole of the central pillar by two spring holders.
Back light. To replace the lamp in the rear lamp, remove the plastic plug from the inside of the luggage compartment, disconnect the wire block, squeeze the base latches and remove it complete with lamps. Then press the lamp, turn it counterclockwise and remove it from the socket.
License plate lights. To replace the lamp, unscrew the screws that secure the lamp, remove it from the socket and remove the diffuser.