Removal the ignition coil (VAZ-21214)

Attention! Work is carried out with the ignition off.

We remove the high-voltage wire.



Using an 8 mm spanner, unscrew the two nuts securing the wires to the ignition coil.

We remove the wires from the coil terminals (blue wires with a black stripe are attached to terminal "B").



Using a 10 mm socket, loosen the nuts securing the coil bracket to the front body panel.

We move the bracket along the grooves from the studs..



…and remove the ignition coil.

We install the coil in the reverse order.