Ignition switch (VAZ-21213)

The ignition switch is checked for correct contact closure in different key positions (Table 7-5) and the operation of the anti-theft device. Voltage from the battery and generator is supplied to contacts "30" and "30/1". The free plug "INT" is used to connect the radio receiver.



The locking rod of the anti-theft device must extend when the key is set to position III (parking) and removed from the lock. The locking rod must retract after turning the key from position III (parking) to position 0 (off). The key must be removed from the lock only in position III.

When installing the contact part into the switch housing, it must be positioned so that the plugs "15" and "30" are on the side of the locking rod (Fig. 7-27), while the wide protrusion of the contact part will enter the wide groove of the switch housing.